Nantong FilterBio Membrane Co., Ltd. is one of the most reliable manufacturers and suppliers of vacuum filtration system in China. Please rest assured to buy high quality vacuum filtration system made in China here from our factory. Welcome to view our website for more information.
The stainless steel manifold for 3 or 6 filtration units is fitted with stainless steel units. The apparatus can be autoclaved and sterilized by dry heat at 180℃.
Aluminum clip is designed into a reasonable closely way, with clip filter glass and intermediate filtration heads together, which ensure strict seal without leakage. There is no cleaning corner exist for stockpile liquid and easy to clean. Stainless steel material makes the analytic results more stable and reliable due to its characteristics of acid proof and alkali, as well as hard to corrosion.
This apparatus is suitable only for vacuum operation. Flushing tubes should not be used at the pressure of exceeding 1.3 bar (300 mbar over-pressure).
Applications
●Microbiological quality control (e.g. Escherichia coli detection), biochemistry, hydrobiology.
●Residue analyses.
●Serial filtration carried out rapidly and easily with a common drainage outlet.
●Drinks (e.g. cold sludge in beer), foodstuffs (e.g. ice cream), cosmetics, pharmaceuticals, water, wastewater.
●Precipitate analysis, contamination tests and so on.
Features
●Each station uses separate control valve for independent operation, easy to use and disinfect with a high efficiency.
●This system can filtrate three or six samples at the same time at low rate, with a high sensitivity.
●Sturdy won't tip when full loaded due to the units with low center of gravity.
●Anodized aluminium handles on both ends are designed for positioning on bench top.
●All MVF series vacuum filtration devices are made of stainless steel which is suitable for filtration, especially in the microbiological field.
Product Information
Type | Components | Picture |
FB-MC-G1 | 1) Stainless Steel Manifold 2) One Glass Filtration Units 3)Two pieces of hosepipe |
|
FB-MC-G3 | 1) Stainless Steel Manifold 2) Three Glass Filtration Units 3) Two pieces of hosepipe | |
FB-MC-G6 | 1) Stainless Steel Manifold 2) Six Glass Filtration Units 3) Two pieces of hosepipe | |
FB-MC-S1 | 1) Stainless Steel Manifold 2) One Stainless Steel Filtration Units 3) Two pieces of hosepipe |
|
FB-MC-S3 | 1) Stainless Steel Manifold 2) Three Stainless Steel Filtration Units 3) Two pieces of hosepipe | |
FB-MC-S6 | 1) Stainless Steel Manifold 2)Six Stainless Steel Filtration Units 3)Two pieces of hosepipe | |
Hot Tags: vacuum filtration system China, factory, manufacturers, suppliers, made in China
